Heat the whole house with a stove that is legal to sell.
Wood stoves, inserts, cookstoves and fireplaces from Drolet, Osburn, Enerzone, Englander, J.A.ROBY and more. Every listing publishes its certification status and measured emission rate — in the United States that is not optional.
- 64models in stock
- 2.5 g/hEPA Step 2 limit — all of ours are under it
- Freedelivery, nationwide
Pick by the space you need to heat
Oversizing a stove is the commonest mistake — you end up damping it down, which smokes, tars the flue and wastes wood. Match the firebox to the room.
Stoves, inserts, cookstoves and fireplaces
Latest arrivals
-
Osburn
Osburn Matrix Wood Burning Stove With Blower
EPA 2020 certified- Heats 500 - 2100 ft²
- 75000 BTU/h
-
Enerzone
Enerzone Solution 3.5 Wood Insert Bundle
EPA 2020 certified- Heats 1000 - 2700 ft²
- 110000 BTU/h
-
Enerzone
Enerzone Solution 2.3-I Wood Insert Bundle
EPA 2020 certified- Heats 500 - 2100 ft²
- 75000 BTU/h
Every stove here states its EPA position
Since 15 May 2020 it has been unlawful to sell a wood heater that is not certified to the EPA Step 2 limits, and the duty sits with the retailer, not the manufacturer. So each listing carries the certification status, the measured particulate emission rate against the 2.5 g/h cord-wood limit, the efficiency and the test standard. If we cannot document it, we do not list it.
How EPA certification works- 2.5 g/hStep 2 cord-wood particulate limit
- 2.0 g/hStep 2 crib-wood limit
- 70%+typical HHV efficiency of the stoves we list
- Exemptsome cookstoves fall outside the rule — and say so
North American built, mostly
We install what we sell
A stove is only as good as its flue. We survey, fit and sign off, so the install matches the manual and the inspector has nothing to argue with.
1. Survey
We check the hearth, the clearances and the chimney before anything is ordered — and this is where the stove size gets settled.
2. Supply
Free delivery nationwide. Stoves ship freight on a pallet; we tell you in advance whether it is kerbside or into the room.
3. Install
Fitted to the manufacturer's manual and to local code, with the paperwork you need for the permit and the inspection.
Tell us the square footage and the insulation — we'll point you at two or three that fit.
Main heat source or backup, mobile home or alcove, existing chimney or new flue: it all changes the answer.
